For DAS integrators

    Measure every network you install

    KALLO adds post-deployment monitoring to every DAS job. Every carrier, Wi-Fi and P25, from one device you mount once and walk away from.

    Book a 20-min demo
    KALLO continuous network monitoring devices
    15 min
    to deploy a KALLO [CONFIRM]
    70%
    fewer routine walk tests [CONFIRM]
    Every
    3G, 4G and 5G band, for every operator

    One device. Every network.

    • AT&T
    • Verizon
    • T-Mobile
    • Wi-Fi
    • P25

    Handover isn't the finish line

    Your customer gets a snapshot at handover. Then nobody can see which network dropped, when, or where in the building. KALLO keeps measuring after your team leaves site.

    Engineer carrying out a one-off walk test at handoverAt handover
    One snapshot, then nothing.
    KALLO mounted on a column in an airport terminalWith KALLO
    Every network, 24/7.

    Every coverage complaint is a truck roll

    When a tenant says the signal's bad on level 12, someone has to go and walk it. That's a crew, a test kit and a report, and you still only see that one afternoon.

    CompareWalk testKALLO
    When you see coverageThe day someone walks itAll the time
    NetworksUsually one carrier per pass [CONFIRM]Every carrier, Wi-Fi and P25 at once
    Cost$5K to $15K per test [CONFIRM]One device, set up once
    Finding the faultBack on siteFrom the dashboard

    What you get

    1. 01

      Every network

      All carriers, Wi-Fi and P25 measured from one KALLO.

    2. 02

      Full depth

      Which network dropped, when, and where in the building.

    3. 03

      Deploy and walk away

      Mount it, power it, leave it running.

    4. 04

      New revenue line

      Offer ongoing monitoring on every job you hand over.

    5. 05

      No NOC export

      Dashboards show coverage visually, out of the box.

    6. See it on one of your current jobs.

      Book a 20-min demo →

    Built for the job after the job

    Commissioning

    Get real-time feedback as you change antenna tilt, amplifier settings and handover parameters, without repeat walk tests between each change.

    Handover

    Give your customer coverage data for every network on day one, not a single test report.

    Ongoing monitoring

    Offer a monitoring service on every system you install. Your customer gets proof the DAS is working, and you get a reason to stay in the account.

    Fault finding

    See the band, the floor and the time it went wrong before anyone gets in a truck.

    Mount it. Power it. Walk away.

    1. 01

      Mount

      Fix it to a wall, ceiling or rooftop.

    2. 02

      Power

      Plug it in and provision it with a QR code.

    3. 03

      View

      Coverage data lands in your dashboard.

    KALLO coverage dashboard on a tablet next to a KALLO device

    Engineering-grade data, without the engineer on site

    • Every band, every operator

      3G, 4G and 5G, plus Wi-Fi and P25

    • The metrics your RF team uses

      RSRP, SINR, PCI, TxP and more

    • Full history

      Every reading ever recorded, so you can scroll back to the moment it dropped

    • Map view

      See your whole fleet on a map, then drill down to building, floor and device

    • Alerts

      An incident and alert log for every KALLO

    • API

      Export raw RF data in near real time into your service desk or OSS, using a GraphQL API

    [CONFIRM] Quote approved for public use

    “KALLO eliminated $100K in annual walk test costs. We deployed it in 15 minutes and haven’t touched it since. It just works.”
    Operations Director, Major Stadium
    • $100K saved
    • 15-min deployment
    • Zero maintenance

    From stadiums to sub-basements

    • Stadiums
    • Airports
    • Hospitals
    • Offices
    • Factories
    • Mines

    Questions integrators ask

    Do I need an RF engineer to set it up?

    No. Mount it, power it and scan the QR code to provision it. Your team can review the data from the office.

    What does it connect to?

    [CONFIRM: power and backhaul requirements, e.g. power over ethernet or a standard outlet, and cellular or wired connection]

    Does it work with every US carrier?

    KALLO measures every carrier, Wi-Fi and P25. [CONFIRM: any carrier provisioning notes for US deployments]

    How much does it cost?

    Pricing depends on the number of devices and sites. Dan will put a quote together on the demo call, built around a real project of yours.

    Can I resell it to my customers?

    Yes. Many integrators add KALLO to the handover as an ongoing monitoring service. [CONFIRM: partner or reseller terms]

    Who owns the data?

    [CONFIRM]

    How many devices can I manage?

    Hundreds, from a single dashboard, across every site you run.

    See KALLO on a real building

    A 20-minute demo with Dan, built around your current DAS projects.

    Book a 20-minute demo